Energy Consumption Data Missing on Car Scanner App

[Chantry_Thedas]

I’ve been using an OBD2 adapter with the Car Scanner app and connected it successfully using the Mach-E profile. While most of the live data seems to work fine, I’ve noticed that the energy consumption rates, both kWh/100km and mi/kWh, are not registering anything. It just shows zeros across the board.

Is there a specific setting or tweak I’m missing to get this data to display correctly?

 

[TripleJ90]

It might be an issue with the app’s settings or the OBD2 adapter compatibility. You can check if the Mach-E profile needs any updates or adjustments.

 

[Redan_Njr]

It might be worth checking if you’re using the latest version of the Car Scanner app. Sometimes updates include fixes or improvements for specific car profiles, including EVs like the Mach-E. Also, make sure your OBD2 adapter supports all the data points; some cheaper models can miss out on transmitting certain parameters.

 

[Dharam8]

I’ve been using an OBD2 adapter with the Car Scanner app and connected it successfully using the Mach-E profile. While most of the live data seems to work fine, I’ve noticed that the energy consumption rates, both kWh/100km and mi/kWh, are not registering anything. It just shows zeros across the board.

Is there a specific setting or tweak I’m missing to get this data to display correctly?

Have you checked the app’s settings to ensure those metrics are enabled, or maybe the Mach-E is just in "savings mode" with its data too?

 

[MachE25]

I’ve been using an OBD2 adapter with the Car Scanner app and connected it successfully using the Mach-E profile. While most of the live data seems to work fine, I’ve noticed that the energy consumption rates, both kWh/100km and mi/kWh, are not registering anything. It just shows zeros across the board.

Have you tried using a different app or adapter to see if the data shows up?