Need advice with Mach-E brake service

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

37Beloved

New member
Messages
1
Reaction score
1
Location
South Carolina
I picked up a new one and I'm getting ready to swap winter tires on. Since I live where they use a ton of salt, I like to service my brakes twice a year. I've seen the post about brake service mode, but I'm wondering if anyone has any tips or resources for actually servicing the brakes themselves. Torque specs, anything! I'm not afraid to get my hands dirty, but I want to make sure I do it right.
 
Just a quick heads-up! For your Mach-E brakejob, you’ll definitely want to have access to FDRS. These brakes are packed with tech - computer modules and sensors everywhere! Seriously, it’s a good idea to hit up your local Ford dealership, chat with a service advisor, and if you can, pick the brain of their EV tech. They could save you from some serious hassle. Good luck, and may the brake gods be with you!
 
I picked up a new one and I'm getting ready to swap winter tires on. Since I live where they use a ton of salt, I like to service my brakes twice a year. I've seen the post about brake service mode, but I'm wondering if anyone has any tips or resources for actually servicing the brakes themselves. Torque specs, anything! I'm not afraid to get my hands dirty, but I want to make sure I do it right.
Just a tip. Look for a dealer who has a friendly and skilled EV Service Representative.
 
I learned from a mechanic buddy that even a quick spring clean can make a big difference. For your CR-V Hybrid, you will need to use the brake service mode to retract the electronic parking brake. As for torque specs, the caliper bolts should be around 80 ft-lbs, but double-check your manual. Clean off the salt and debris, and you will be good to go!
 
Hmm... IMO, you don't need to service your brakes all that often. I live in a salty area, and I only replace my brake pads every five years. When you change your tires, just give the calipers a good wiggle to make sure they're not seized up. If they move freely, you're good to go.
 
I just checked a version of the Mach-E service manual, and trust me, it directs Ford technicians to follow the on-screen prompts when servicing the brake system. These cars are nothing like the ones from back in the day...
 

Join the Mustang Mach-E Community

Support, tutorials, and a friendly community

Back
Top